|
|
|
Intelligent Vehicle / Transportation Systems |
|
165 |
DESIGN AND DEVELOPMENT OF AUTOMOTIVE BLIND SPOT DETECTION RADAR SYSTEM BASED ON ROI PRE-PROCESSING SCHEME
E. HYUN, Y. S. JIN, J. H. LEE
Int J Automot Technol. 2017;18(1):165-177. DOI: https://doi.org/10.1007/s12239-017-0017-5
 
|
Cited By 24 |
|
|
|
|
|
Automobile Body and Safety |
|
671 |
LOOSENING ANALYSIS FOR FASTENING SCREW OF AUTOMOTIVE DOOR TRIM PARTS
S. M. YANG, S. H. YOO, D. S. GI, S. B. CHOI, K. S. KIM, N. T. JEONG, S. U. CHOI, M. W. SUH, J. H. LEE
Int J Automot Technol. 2016;17(4):671-679. DOI: https://doi.org/10.1007/s12239-016-0066-1
|
|
Cited By 7 |
|
|
|
|
|
Automobile Body and Safety |
|
681 |
CRASHWORTHINESS OF CHROMIUM PLATED PLASTIC RADIATOR GRILLE
S. H. YOO, N. T. JEONG, K. S. KIM, S. M. YANG, J. H. LEE, S. H. CHOI, M. W. SUH
Int J Automot Technol. 2016;17(4):681-687. DOI: https://doi.org/10.1007/s12239-016-0067-0
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
165 |
DROWSY BEHAVIOR DETECTION BASED ON DRIVING INFORMATION
M. S. WANG, N. T. JEONG, K. S. KIM, S. B. CHOI, S. M. YANG, S. H. YOU, J. H. LEE, M. W. SUH
Int J Automot Technol. 2016;17(1):165-173. DOI: https://doi.org/10.1007/s12239-016-0016-y
|
|
Cited By 44 |
|
|
|
|
|
Engine, Emission Technology |
|
551 |
ON-ROAD CHASING AND LABORATORY MEASUREMENTS OF EXHAUST PARTICLE EMISSIONS OF DIESEL VEHICLES EQUIPPED WITH AFTERTREATMENT TECHNOLOGIES (DPF, UREA-SCR)
S. H. LEE, J. H. KWAK, S. Y. LEE, J. H. LEE
Int J Automot Technol. 2015;16(4):551-559. DOI: https://doi.org/10.1007/s12239-015-0056-8
|
|
Cited By 36 |
|
|
|
|
|
Engine, Emission Technology |
|
709 |
ANALYSIS OF THE EFFECT OF COLD START ON FUEL ECONOMY OF GASOLINE AUTOMATIC TRANSMISSION VEHICLE
Y. K. LEE, J. I. PARK, J. H. LEE
Int J Automot Technol. 2014;15(5):709-714. DOI: https://doi.org/10.1007/s12239-014-0073-z
|
|
Cited By 5 |
|
|
|
|
|
Engine, Emission Technology |
|
543 |
ON-ROAD CHASING MEASUREMENT OF EXHAUST PARTICLE EMISSIONS FROM DIESEL, CNG, LPG, AND DME-FUELED VEHICLES USING A MOBILE EMISSION LABORATORY
J. H. KWAK, H. S. KIM, J. H. LEE, S. H. LEE
Int J Automot Technol. 2014;15(4):543-551. DOI: https://doi.org/10.1007/s12239-014-0057-z
|
|
Cited By 35 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
667 |
EMPIRICAL ANALYSIS ON THE EFFECT OF DESIGN VARIABLES OF AUTOMOTIVE SEAT LUMBAR SUPPORT ON THE INITIAL SITTING DISCOMFORT
J. T. YANG, H. Y. CHOI, J. H. LEE, S. U. LEE
Int J Automot Technol. 2014;15(4):667-672. DOI: https://doi.org/10.1007/s12239-014-0069-8
|
|
Cited By 4 |
|
|
|
|
|
Engine, Emission Technology |
|
377 |
NONLINEAR SLIDING MODE OBSERVER FOR EXHAUST MANIFOLD PRESSURE ESTIMATION IN A LIGHT-DUTY DIESEL ENGINE
J. H. LEE, H. J. LEE, M. SUNWOO
Int J Automot Technol. 2014;15(3):377-386. DOI: https://doi.org/10.1007/s12239-014-0040-8
|
|
Cited By 9 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
1 |
HOT JUDDER SIMULATION OF A VENTILATED DISC AND DESIGN OF AN IMPROVED DISC USING SENSITIVITY ANALYSIS
J. H. PARK, Tae Won Park, J. H. LEE, M. H. CHO
Int J Automot Technol. 2014;15(1):1-6. DOI: https://doi.org/10.1007/s12239-014-0001-2
|
|
Cited By 6 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
927 |
ROBUST DESIGN OPTIMIZATION OF SUSPENSION SYSTEM CONSIDERING STEERING PULL REDUCTION
K. PARK, S. J. HEO, D. O. KANG, J. I. JEONG, J. H. YI, J. H. LEE, K. W. KIM
Int J Automot Technol. 2013;14(6):927-933. DOI: https://doi.org/10.1007/s12239-013-0102-3
|
|
Cited By 15 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
499 |
SHAPE OPTIMIZATION OF LOWER CONTROL ARM CONSIDERING MULTI-DISCIPLINARY CONSTRAINT CONDITION BY USING PROGRESS META-MODEL METHOD
S. J. HEO, D. O. KANG, J. H. LEE, I. H. KIM, S. M. H. DARWISH
Int J Automot Technol. 2013;14(3):499-505. DOI: https://doi.org/10.1007/s12239-013-0054-7
|
|
Cited By 22 |
|
|
|
|
|
Automobile Electronics |
|
79 |
EXPERIMENTS AND THERMAL-ELECTRICAL ANALYSIS OF BUSS BAR AND RELAY ASSEMBLIES IN JUNCTION BLOCKS
S. Y. HWANG, J. H. LEE, K. K. VISUWANATHAN, I. H. BAN
Int J Automot Technol. 2013;14(1):79-90. DOI: https://doi.org/10.1007/s12239-013-0010-6
|
|
Cited By 3 |
|
|
|
|
|
Automobile Electronics |
|
1141 |
CURRENT SENSORLESS DRIVE METHOD FOR ELECTRIC POWER STEERING
J. Y. YOO, J. H. LEE, H. T. MOON
Int J Automot Technol. 2012;13(7):1141-1147. DOI: https://doi.org/10.1007/s12239-012-0117-1
|
|
Cited By 14 |
|
|
|
|
|
Alternative Energy & Vehicle |
|
1149 |
COMBUSTION CHARACTERISTICS OF LPG AND BIODIESEL MIXED FUEL IN TWO BLENDING RATIOS UNDER COMPRESSION IGNITION IN A CONSTANT VOLUME CHAMBER
W. C. CHOI, S. W. LEE, Y. S. CHO, J. H. LEE, Y. J. PARK
Int J Automot Technol. 2012;13(7):1149-1157. DOI: https://doi.org/10.1007/s12239-012-0118-0
|
|
Cited By 6 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
215 |
NON-SINGULAR SLIP (NSS) METHOD FOR LONGITUDINAL TIRE FORCE CALCULATIONS IN A SUDDEN BRAKING SIMULATION
J. H. LEE, W. S. YOO
Int J Automot Technol. 2012;13(2):215-222. DOI: https://doi.org/10.1007/s12239-012-0018-3
|
|
|
|
|
Other Fields of Automotive Engineering |
|
771 |
EFFECTS OF FTP-75 MODE VEHICLE FUEL ECONOMY IMPROVEMENT DUE TO TYPES OF POWER STEERING SYSTEM
H. S. WI, Y. K. LEE, J. I. PARK, J. H. LEE, K. S. PARK
Int J Automot Technol. 2009;10(6):771-776.
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
211 |
PREDICTIVE CONTROL OF A VEHICLE TRAJECTORY USING A COUPLED VECTOR WITH VEHICLE VELOCITY AND SIDESLIP ANGLE
J. H. LEE, W. S. YOO
Int J Automot Technol. 2009;10(2):211-217.
|
|
|
|
|
Engine, Emission Technology |
|
423 |
MEASUREMENT OF SOOT OXIDATION WITH NO2-O2-H2O IN A FLOW REACTOR SIMULATING DIESEL ENGINE DPF
J. JUNG, J. H. LEE, S. SONG, K. M. CHUN
Int J Automot Technol. 2008;9(4):423-428.
|
|
|
|
|
Engine, Emission Technology |
|
149 |
NUMERICAL ANALYSIS OF A SAMPLING MODULE FOR A FAST RESPONSE EXHAUST GAS ANALYZER
W. S. KIM, J. H. LEE, J. S. YOO, B. O. RHEE, J. I. PARK
Int J Automot Technol. 2007;8(2):149-154.
|
|
|
|
|
Engine, Emission Technology |
|
385 |
MEASUREMENT OF CO2 CONCENTRATION AND A/F RATIO USING FAST NDIR ANALYZER ON TRANSIENT CONDITION OF SI ENGINE
S. W. LEE, W. S. KIM, J. H. LEE, J. I. PARK, J. S. YOO
Int J Automot Technol. 2006;7(4):385-390.
|
|
|
|
|
Automobile Body and Safety |
|
51 |
DEVELOPMENT OF ROLLOVER CRITERIA BASED ON SIMPLE PHYSICAL MODEL OF ROLLOVER EVENT
M. H. KIM, J. H. OH, J. H. LEE, M. C. JEON
Int J Automot Technol. 2006;7(1):51-59.
|
|
|
|
|
Automobile Body and Safety |
|
33 |
DEVELOPMENT OF FINITE ELEMENT HUMAN NECK MODEL FOR VEHICLE SAFETY SIMULATION
I. H. LEE, H.-Y. CHOI, J. H. LEE, D. C. HAN
Int J Automot Technol. 2004;5(1):33-46.
|
|
|
|
|
Alternative Energy & Vehicle |
|
93 |
ANALYSIS OF IN-CYLINDER FUEL-AIR MIXTURE DISTRIBUTION IN A HEAVY DUTY CNG ENGINE
K.Y. HUH, SEOK Y. LEE, Y. M. KIM, J. H. LEE
Int J Automot Technol. 2001;2(3):93-101.
|
|
|
|
> Browse Articles > Author Index
